Cisco Profile Series User Manual

www.cisco.com
... then select, in the
usual way, whom to
add to the ongoing
call.
Calling participants to add them to an ongoing call (Multisite)
While in a call
you may add
participants
provided that your
system permits to
do so. Tap Add ...
Once you have selected someone,
tap Start to include this participant
in the meeting.
Repeat the procedure to include more participants,
if needed.
The maximum number of participants possible will
depend on the system used, consult your System
Administrator, if in doubt.
Note that even voice-only participants may be
added.
Tap END to terminate the entire
conference. To disconnect just
one of the participants, tap the
participant’s name along the
bottom line and then tap END.
Calling more than one using Multisite is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.
20
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, MX200 User guide
D14582.07 User guide Prole Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.

Cisco Profile Series Specifications

General

Brand	Cisco
Model	Profile Series
Category	Conference System
Language	English