Cisco Profile Series - Administrator settings-IP settings for the codec

www.cisco.com
The IP settings pane for the Codec of the system lets
you specify whether to use IPv4 (below left) or IPv6
(below right).
Administrator settings—IP settings for the codec
If IPv4 assignment is specied to be
Auto, you must save your settings to
put changes into eect.
Remember to save your settings to
put changes into eect.
35
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, MX200 User guide
D14582.07 User guide Prole Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.