Cisco Headset 562 User Manual

Cisco Headset 561 and Cisco Headset 562 with Standard Base
For Cisco IP Phone 8811, 8841, 8845, 8851, 8861, 8865, and 8865NR on Cisco Unied Communications Manager
Quick Reference Guide
Headset LED status indication
Incoming Call Blinking red
Active Call Steady red
Headset paired with dock White LED blinking every 4 seconds
Headset and dock not paired White LED blinking rapidly
High Sound Pressure—Avoid listening to high volume levels for long periods to prevent
possible hearing damage.
When you plug in your headset, lower the volume of the headset speaker before you put
the headset on. If you remember to lower the volume before you take the headset o, the
volume will start lower when you plug in your headset again.
Be aware of your surroundings. When you use your headset, it may block out important
external sounds, particularly in emergencies or in noisy environments. Don’t use the
headset while driving. Don’t leave your headset or headset cables in an area where
people or pets can trip over them. Always supervise children who are near your headset
or headset cables.
Call Indication
Incoming call Blinking green
Active call Steady green
Muted call Steady red
Power/Call
Mute
Volume +/-
Base LED status indication
Battery strength LEDs show solid as battery charges
System updating LEDs blink in sequence from left to right
Headset and dock not paired All LEDs blinking

Cisco Headset 562 Specifications

General

Brand	Cisco
Model	Headset 562
Category	Headsets
Language	English

Summary

Headset and Base Status Indicators

Headset LED Status Indication

Details the LED indicators on the headset for call status and pairing.

Base LED Status Indication

Explains the LED indicators on the base for battery and system updates.

Call Indication on Base

Describes LED indications on the base unit for incoming and active calls.

Safety and Usage Precautions

High Sound Pressure Warning

Advises against listening at high volumes for extended periods to prevent hearing damage.

Environmental Awareness and Usage Safety

Warns about blocking external sounds, not using while driving, and cable safety.

Headset Call Management

Power On/Off and Basic Call Handling

Instructions for turning the headset on/off, making, ending, and rejecting calls.

Call Hold and Resume Functions

Details on placing calls on hold and resuming them, including handling incoming calls.

Mute and Unmute Controls

How to mute and unmute the microphone during an active call.

USB Audio Adjustments and Testing

Adjust Speaker Feedback and Volume (USB)

Guides on adjusting speaker feedback (sidetone) and microphone gain via USB.

Adjust Bass/Treble and Test Microphone (USB)

Instructions for tuning audio balance and testing microphone performance when connected via USB.