Cisco Linksys WAP300N - Back View; Package Contents

Overview
Linksys WAP300N
Overview
Package contents
In addition to your device, the package includes:
•
Quick Installation Guide
•
Network (Ethernet) cable
•
AC power adapter
•
Setup CD containing setup software and documentation
•
Detachable antennas (2)
Back view
Ethernet port and activity indicator
Antennas
Wi-Fi Protected Setup button
and indicator
Wireless activity indicator
Power port and indicator
• Antenna connector—For connecting the included antennas.
•
Wireless activity indicator—In Access Point mode, it lights up solid
when the wireless interface is ready. In other modes, it lights up solid
when the WAP300N connected to a router, access point, or another
WAP300N. Flashes while actively sending or receiving data over a
wireless connection.
• Wi-Fi Protected Setup™ button—Press this button to easily set up a
wireless connection.
•
Wi-Fi Protected Setup indicator—Stays on steadily following a
successful Wi-Fi Protected Setup connection or when wireless security
is enabled. Flashes slowly during Wi-Fi Protected Setup. Flashes quickly
when there is a Wi-Fi Protected Setup error.
• Ethernet port—Connect a wired network device to this port.
•
Ethernet activity indicator—Lights up when there is a wired connection.
Flashes while actively sending or receiving data over the Ethernet port.
• Power port—Connect the included AC power adapter to this port.
CAUTION
Use only the adapter that came with your router.
•
Power indicator—Stays on steadily while power is connected. Flashes
slowly during bootup, firmware upgrades, and factory reset.