8
If you are running
Windows 98SE, Windows Me,
or Windows 2000
A Insert the Wireless-G Network
Adapter Setup Wizard CD-ROM
into your CD-ROM drive. The
Setup Wizard should run
automatically, and the
Welcome screen should
appear. If it does not, click Start
and choose Run. In the field
that appears, enter
D:\setup.exe (if “D” is the letter
of your CD-ROM drive).
B Click the Install button.
C After reading the License
Agreement, click Next.
D The next screen has you
choose a wireless mode. Click
Infrastructure Mode if you want
your wireless computers to
communicate using a wireless
access point. Click Ad-Hoc
Mode if you want multiple
wireless computers to network
directly with each other without
using a wireless access point.
In the SSID field, enter the SSID
of your wireless network. The
SSID must be identical for all
devices in the network. The
default setting is linksys (all
lowercase). Click Next.
Install the Notebook Adapter
3
B
D
NOTE: For security, Linksys
recommends that you change the
default SSID to a unique name.
NOTE: Windows XP users should
refer to the section for Windows XP.
To Next Page
Loading...
Need help?
General
