EasyManuals Logo

Cisco LINKSYS WRT54G2 User Manual

Cisco LINKSYS WRT54G2
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Chapter 3
Advanced Configuration
10
Wireless-G Broadband Router
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Basic Wireless Settings
The basic settings for wireless networking are set on this
screen.
There are two ways to configure the Routers wireless
network(s), manual and Wi-Fi Protected Setup.
Wi-Fi Protected Setup is a feature that makes it easy to set
up your wireless network. If you have client devices, such
as wireless adapters, that support Wi-Fi Protected Setup,
then you can use Wi-Fi Protected Setup.
Wireless Configuration To manually configure your
wireless network, select Manual. Proceed to the “Basic
Wireless Settings” section. To use Wi-Fi Protected Setup,
select Wi-Fi Protected Setup. Proceed to the Wi-Fi
Protected Setup” section.
Basic Wireless Settings
Wireless > Basic Wireless Settings (Manual Setup)
Wireless Network Mode From this drop-down menu,
you can select the wireless standards running on your
network. If you have Wireless-G and Wireless-B devices
in your network, keep the default setting, Mixed. If you
have only Wireless-G devices, select Wireless-G Only. If
you have only Wireless-B devices, select Wireless-B Only.
If you do not have any wireless devices in your network,
select Disabled.
Wireless Network Name (SSID) The SSID is the network
name shared among all points in a wireless network.
The SSID must be identical for all devices in the wireless
network. It is case-sensitive and must not exceed
32 characters (use any of the characters on the keyboard).
Make sure this setting is the same for all points in your
wireless network. For added security, you should change
the default SSID (linksys) to a unique name.
Wireless Channel Select the channel from the list
provided to correspond with your network settings. All
devices in your wireless network must be broadcast on
the same channel in order to function correctly.
Wireless SSID Broadcast When wireless clients survey
the local area for wireless networks to associate with, they
will detect the SSID broadcast by the Router. To broadcast
the Routers SSID, keep the default setting, Enabled. If you
do not want to broadcast the Router’s SSID, then select
Disabled.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Wi-Fi Protected Setup
There are three methods available. Use the method that
applies to the client device you are configuring.
Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)
Wi-Fi Protected Setup > Congratulations
NOTE: Wi-Fi Protected Setup configures one
client device at a time. Repeat the instructions
for each client device that supports Wi-Fi
Protected Setup.

Table of Contents

Other manuals for Cisco LINKSYS WRT54G2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco LINKSYS WRT54G2 and is the answer not in the manual?

Cisco LINKSYS WRT54G2 Specifications

Power IconPower
power supplyExternal
voltage12V DC
current0.5A
Operating Environment IconOperating Environment
operating temperature0 to 40°C
storage temperature-20 to 60°C
operating humidity10 to 85%, Noncondensing
Weight and Dimensions IconWeight and Dimensions
dimensions203 x 35 x 160 mm
weight0.28 kg

Related product manuals