Step 3:
On the login screen, enter admin on the username field and leave the password blank.
Step 4:
Once logged in, go to Admin>Firmware Upgrade. Click Upgrade then for the File Type
choose Software Image. On the TFTP Server field, enter the IP address of the computer
running the TFTP Software. Leave the Source File field blank and type the filename of the
firmware on the Destination File.
Step 5:
Click on Proceed.
Related Information
Technical Support &Documentation − Cisco Systems•
Updated: Dec 12, 2008 Document ID: 109133
To Previous Page
Loading...
Need help?
General
