Need help?Do you have a question about the Cisco SRW2016 and is the answer not in the manual?
General| Number of Ports | 16 |
|---|---|
| Port Speed | 10/100/1000 Mbps |
| Layer | Layer 2 |
| Switching Capacity | 32 Gbps |
| Forwarding Rate | 23.8 Mpps |
| VLANs | 256 |
| Quality of Service (QoS) | Yes |
| Power over Ethernet (PoE) | No |
| Power Supply | Internal |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -4 to 158°F (-20 to 70°C) |
| Storage Humidity | 5% to 95% non-condensing |
| MAC Address Table | 8K entries |
| Management | Web-based |
| Jumbo Frame Support | Yes |
| Operating Humidity | 10% to 85% non-condensing |
Explains various icons used in the guide.
Lists website addresses for support and information.
Provides legal information about Linksys products.
Details the front panel, LEDs, and back panel of the SRW2048 switch.
Details the front panel, LEDs, and back panel of the SRW2024 switch.
Details the front panel, LEDs, and back panel of the SRW2016 switch.
Details the front panel, LEDs, and back panel of the SRW248G4 switch.
Details the front panel, LEDs, and back panel of the SRW224G4 switch.
Explains how to connect network devices to the switch.
Covers desktop and rack-mount installation considerations.
Provides step-by-step instructions for connecting devices and power.
Outlines console and web-based utility configuration paths.
Introduces the menu-driven console interface for switch management.
Guides on configuring HyperTerminal for console access.
Explains how to connect via a Telnet session.
Details navigating the console menus and options.
Lists main categories within the System Configuration Menu.
Shows how to view firmware versions and system details.
Covers settings for serial and Telnet sessions.
Explains baud rate settings for serial port communication.
Details timeout settings for Telnet and SSH server configuration.
Covers SSH server status and crypto key generation.
Explains generating and viewing SSH keys.
Guides on setting up user accounts and passwords.
Details SSL certificate generation and security options.
Describes specifying a device-generated certificate.
Outlines options for configuring IP address settings.
Explains setting IP address, subnet mask, and gateway.
Covers enabling and configuring HTTP/HTTPS servers.
Guides on performing network connectivity tests.
Details uploading/downloading files via TFTP.
Covers restoring factory defaults and rebooting the device.
Shows how to view the status of switch ports.
Explains how to configure individual port settings.
Provides assistance on navigating the console interface.
Instructions on how to access the switch's web interface.
Covers initial setup, device information, and network settings.
Guides on configuring time, daylight saving, and power saving.
Details port settings, descriptions, and link aggregation configuration.
Covers creating, managing VLANs, and GVRP protocol.
Explains RMON statistics, history, alarms, events, and port utilization.
Details QoS settings for traffic prioritization and bandwidth management.
Covers STP, RSTP, and MSTP settings for network loop prevention.
Explains IGMP snooping and bridge multicast settings.
Covers SNMP global parameters, views, groups, and notifications.
Details user authentication, address management, logging, and system operations.
Explains Gigabit Ethernet speeds and connectivity.
Describes fiber optic cable types and connectors.
Guides on enabling TCP/IP for network communication.
Explains sharing printers, folders, and files.
Covers finding and adding PCs on the network.
Step-by-step guide for downloading software via Xmodem.
Lists ports, cabling, LEDs, performance, and management specs for SRW2048.
Lists ports, cabling, LEDs, performance, and management specs for SRW2016/SRW2024.
Lists ports, cabling, LEDs, performance, and management specs for SRW224G4/SRW248G4.
Details QoS, VLAN, Link Aggregation, STP, IGMP, and other standards.
Lists physical dimensions, weight, power, temperature, and humidity specs.
Outlines the product's limited warranty period and coverage.
Specifies conditions under which the warranty is void.
Guides on how to get technical support and service.
Details regulatory compliance for FCC and Industry Canada.
Explains the disposal and recycling requirements for EU customers.
Explains the disposal and recycling requirements for EU customers.
Explains the disposal and recycling requirements for EU customers.
Explains the disposal and recycling requirements for EU customers.
Outlines the license agreement for Linksys proprietary software.
Details the GNU General Public License terms for open source software.
Specifies the license terms for OpenSSL cryptographic software.
Provides website, FTP, and phone contact details for Linksys.
To Next Page
