13
Configuration Using the Console Interface
WebView Switches
Chapter 4
Telnet Configuration
The Telnet Configuration screen displays the timeout value.
The value is entered in seconds. If you do not want the
Telnet session to timeout, you may enter a value of 0 sec.
Telnet Configuration
Select Edit and press the Enter key to make changes.
When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the
Enter key to save your changes. To exit, select Quit and
press the Enter key.
SSH Configuration
The SSH Configuration screen displays the following
options:
SSH Server Configuration •
SSH Server Status •
SSH Crypto Key Generation •
SSH Keys Fingerprints •
SSH Configuration
SSH Server Configuration
On the SSH Server Configuration screen, you can enable
or disable the SSH Server by navigating to the SSH Server
option and using the SPACE bar to toggle the option. The
SSH Server Port can be modified by entering in the value.
SSH Server Configuration
Select Edit and press the Enter key to make changes.
When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the
Enter key to save your changes. To exit, select Quit and
press the Enter key.
SSH Status
The SSH Status screen displays whether the SSH Server is
enabled, the RSA and DSA key status, and any open SSH
sessions.
SSH Status
Select Refresh to update the screen if necessary. To exit,
select Quit and press the Enter key.
To Next Page
Loading...
Need help?
General
