12
Configuration Using the Console Interface
WebView Switches
Chapter 4
Versions
The Versions screen displays the Switch’s boot, software,
and hardware firmware versions.
Versions
General System Information
The General System Information screen displays general
information about the Switch.
General System Information
Select Edit and press the Enter key to make changes.
When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the
Enter key to save your changes. To exit, select Quit and
press the Enter key.
Management Settings
From the Management Settings screen, you can set the
following options:
Serial Port Session Configuration •
Telnet Session Configuration •
Secure Telnet (SSH) Configuration. •
Management Settings Menu
Serial Port Configuration
The Serial Port Configuration screen displays the Switch’s
baud rate.
Serial Port Configuration
Select Edit and press the Enter key to make changes.
Toggle to the desired speed and when your changes are
complete, press the Esc key to return to the Action menu.
Select Save and press the Enter key to save your changes.
To exit, select Quit and press the Enter key.
To Next Page
Loading...
Need help?
General
