Cisco TelePresence IX5200 - Page 23

Installing the Cable Runner
© 2015 Cisco Systems, Inc. All rights reserved.
Page 23
1
a. Assemble the 2x cable runner bridges 700-43302-xx to the cable runner base 700-42946-xx with
4x black M4x12mm screws 48-2426-xx using a #2 Phillips screwdriver. b. Install the cable runner plate
700-44717-xx to the cable runner 700-42946-xx with 4x M6x10mm screws 69-2803-xx.
4x 48-2426-x x
700-44717-x x
4x 69-2803-x x
700-43302-xx
700-42946-xx