Starting Installation and Cabling of the Front Row Table
© 2015 Cisco Systems, Inc. All rights reserved.
Page 51
2
Turn the 4x table legs (1x each inside table legs 800-41001-xx and 800-44195-xx and 2x outside table
legs 800-41002-xx) upside down. Adjust the levelers until there is 1 inch (25mm) between the bottom
edge of the leg and the base of the foot.
25mm (1”)
4x first row table legs (1x 800-41001-xx
, 1x
800-44195-xx & 2x 800-41002-xx)
To Next Page
Loading...
