Installing and Cabling the Displays
© 2015 Cisco Systems, Inc. All rights reserved.
Page 77
4
Insert the spool on the left display. The procedure is the same as installing the spool on the right
display, but you place the spool on the lower left side (when viewed from the FRONT) of the display,
instead of the lower right. Make sure that there is 1 1/8 inch (29mm) distance between the spool and the
rear of the display for correct installation of the display.
69-2625-xx
1 1/8” (29 mm)
To Next Page
Loading...
