Cisco TelePresence MX700 - Page 19

15
Fasten covers to lower frame
A
78-100254-03A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Installation guide for Cisco TelePresence MX700 Single camera - Wall mount
Page 19
Let the cover rest on the bottom frame on
one side. Hold the cover in place while you
fasten it with a screw. Reach the screw hole
through the monitor’s lifting handle.
Repeat this step for the other cover.
2 ×
M6x12, pan (one for each cover)