Cisco TelePresence MX700 - Chapter 1 Introduction

78-100254-03A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Installation guide for Cisco TelePresence MX700 Single camera - Wall mount
Page 3
Packaging
1
Open the plastic snap locks and remove the
side walls.
Lift off box L/M. Lay box A flat on the floor
and remove the lid.
2
L/M
A
D
Boxes are labeled A to M. This
guide refers to the labels.
A M
...
B+E-G
Shows which boxes are inside.
Tools and screws are in this box.