Cisco TelePresence System Codec C-Series Reference Guide

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 205
Cisco TelePresence System Codec C40/C60 API Reference Guide
xStatus SystemUnit Diagnostics Message Level
Returns information on the level of the diagnostics message.
Error: There is an error in the system. The system can still be used, but there can be some
restrictions.
Warning: A problem is detected and a more specific report follows indicating the exact problem.
Critical: The warning level is critical. The system cannot be used.
Value space of the result returned:
<Error/Warning/Critical>
Example:
xStatus SystemUnit Diagnostics Message Level
*r Status (status=Error):
Reason: No match on address expression
XPath: Status/SystemUnit/Diagnostics/Message/Level
** end
xStatus SystemUnit Diagnostics Message Description
A description of the current diagnostics alerts.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics Message Description
*s SystemUnit DiagnosticsResult Message 1 Description: "IP configuration
incomplete"
** end
xStatus SystemUnit Diagnostics Message References
Additional information on the diagnostics alert, if available.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics Message References
*s SystemUnit DiagnosticsResult Message 1 References: ""
** end
xStatus SystemUnit Diagnostics ExtendedLogging Mode
Indicates whether extended logging of diagnostics is turned on or off.
Value space of the result returned:
<On/Off>
Example:
xStatus SystemUnit Diagnostics ExtendedLogging Mode
*s SystemUnit Diagnostics ExtendedLogging Mode: Off
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence System Codec C-Series Specifications

General

Brand	Cisco
Model	TelePresence System Codec C-Series
Category	Conference System
Language	English