Cisco TelePresence System Profile Series Reference Guide

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 216
Cisco TelePresence System Codec C40/C60 API Reference Guide
xStatus Video PIP Presentation Position
Shows the position of the presentation image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video PIP Presentation Position
*s Video PIP Presentation Position: CenterLeft
** end
xStatus Video OSD Output
Indicates which monitor is used for on-screen display output.
Value space of the result returned:
<Integer>
Example:
xStatus Video OSD Output
*s Video OSD Output: 3
** end
xStatus Video OSD Mode
Indicates whether on-screen display in indicator or full mode.
Indicators: The on-screen display is in passive mode when a Touch controller is paired to the
system.
Full: Full on—screen display menu is active and can be controlled with a remote control.
Value space of the result returned:
<Indicators/Full>
Example:
xStatus Video OSD Mode
*s Video OSD Mode: Full
** end
Experimental status
The Experimental status is for testing only and should not be used unless agreed with Cisco. These
settings are not documented and WILL change in later releases.
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence System Profile Series Specifications

General

Brand	Cisco
Model	TelePresence System Profile Series
Category	Conference System
Language	English