Cisco TelePresence System Profile Series Reference Guide

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 31
Cisco TelePresence System Codec C40/C60 API Reference Guide
xConfiguration Audio Input Microphone [1..2]/[1..4] Equalizer ID
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Select the audio input microphone equalizer ID.
Requires user role: ADMIN
Value space: <1..8>
Range: Select Equalizer ID 1 to 8.
Example:
xConfiguration Audio Input Microphone 1 Equalizer ID: 1
xConfiguration Audio Input Microphone [1..2]/[1..4] Equalizer Mode
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Set the audio input microphone equalizer mode.
Requires user role: ADMIN
Value space: <Off/On>
Off: No equalizer.
On: Enable the equalizer for the audio input microphone.
Example:
xConfiguration Audio Input Microphone 1 Equalizer Mode: Off
xConfiguration Audio Input Microphone [1..2]/[1..4] VideoAssociation
MuteOnInactiveVideo
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Enable association of a video source to a microphone audio input.
Requires user role: ADMIN
Value space: <Off/On>
Off: No video source is associated.
On: A video source is associated, and the audio will be muted if the associated video source is not
displayed.
Example:
xConfiguration Audio Input Microphone 1 VideoAssociation
MuteOnInactiveVideo: On
xConfiguration Audio Input Microphone [1..2]/[1..4] VideoAssociation VideoInputSource
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Select the associated video input source.
Requires user role: ADMIN
Value space: <1/2/3>
Range: Select one of the video input sources.
Example:
xConfiguration Audio Input Microphone 1 VideoAssociation VideoInputSource:
1
xConfiguration Audio Input Microphone [1..2]/[1..4] Level
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Define the audio level of the Microphone input connector, in steps of 1 dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview of
the values represented in dB.
Requires user role: ADMIN
Value space: <0..24>
Range: Select a value from 0 to 24 dB.
Example:
xConfiguration Audio Input Microphone 1 Level: 15
xConfiguration Audio Input Microphone [1..2]/[1..4] Mode
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone connectors.
Set the audio input microphone mode.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the microphone connector.
On: Enable the microphone connector.
Example:
xConfiguration Audio Input Microphone 1 Mode: On
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfigu ration

Cisco TelePresence System Profile Series Specifications

General

Brand	Cisco
Model	TelePresence System Profile Series
Category	Conference System
Language	English