Cisco TelePresence - CUCM Region Settings Configuration; Content Server Integration Settings

3-35
Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide
Chapter 3 Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence
CUCM Integration with Content Server 6.2
Region configuration on CUCM
Step 1 Login to the Cisco Unified Communication Manager Administration Interface.
Step 2 Select System > Region Information > Region.
Step 3 Click Find.
Step 4 Select Default.
Step 5 Under the Maximum Session Bit rate for Video Calls section, select the last radio button and enter
32000 kbps as highlighted in the snapshot.
CUCM Configuration Setting on Content Server
After ensuring that CUCM and Content Server are ready for the integration, do the following procedure
to set up the integration and to enter the port settings.
Field Setting
Route Pattern Enter the route pattern for TCS trunk.
Gateway/Route List Select the name of the route list that you created in the Create a Route List
(for a TCS Cluster). For example, click “SIP_Trunk_Route_List.”