Appendix B
How to Install and Access USB Storage
39
Simultaneous Dual-Band Wireless-N Gigabit Router
Access Mapped Drive
1. On your desktop, double-click the Computer icon.
Computer Icon
NOTE: If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2. Double-click the mapped drive to access it.
Double-Click Mapped Drive
Windows XP
Map a Drive
1. On your desktop, double-click the My Computer icon.
My Computer Icon
NOTE: If the My Computer icon is not
displayed, then go to Start > All Programs >
Accessories > Windows Explorer.
2. In the Address field, enter \\WRT610N (the server
name of the Router).
Enter Server Name of Router
NOTE: Another option is to use the IP address
of the Router. In the Address field, enter the local
IP address of the Router: \\xxx.xxx.xxx.xxx
The default is 192.168.1.1. You can change this
IP address on the Setup > Basic Setup screen;
refer to Setup > Basic Setup, page 6.
3. A login screen may appear. If prompted, enter your
account user name and password. (For the admin
account, admin is both the default user name and
password.)
Enter Account User Name and Password
User accounts are set up on the Storage > Administration
screen; for more information, refer to , page 41.
4. Right-click the folder you want to share, and click Map
Network Drive. (The default shared folder is named
Public.)
Map Network Drive
To Next Page
Loading...
Need help?
General
