Need help?Do you have a question about the Cissell HF 234 and is the answer not in the manual?
Key safety guidelines for operation, installation, and maintenance to prevent injury or damage.
Instructions for connecting the electrical power supply, including voltage and wiring details.
Covers opening the door, filling the drum, closing the door, and selecting programs.
How to initiate a cycle, understand program sequence indicators, wash, and spin LEDs.
How to use and activate special functions (F1-F8) during program execution.
How to program stop points within a cycle and set an automatic delayed start time.
Details on error codes E3 (Eprom), E4 (water level), E5 (Heating), E6 (door lock), E7 (safety level), and E8 (temperature sensor).
Explanation of error codes E9 (motor protection), EA/Eb (tilt switch), and Mot 2 (rotation sensor).
To Next Page
General