To Next PageTo Next Page
Need help?Do you have a question about the Citel MJ8-POE-A and is the answer not in the manual?
General| Model | MJ8-POE-A |
|---|---|
| Ports | 8 |
| Power over Ethernet (PoE) | Yes |
| Nominal Voltage (Un) | 48 V |
| Maximum Discharge Current (Imax) | 10 kA |
| Surge Current (8/20μs) | 10 kA |
| Data Rate | 1000 Mbps |
| Connection | RJ45 |
| PoE Compatibility | IEEE 802.3af/at |
| Operating Temperature | -40°C to +85°C |
| Response Time | <1 ns |
| Max Surge Current | 10 kA |
| Standards | IEC 61643-21; EN 61643-21 |
| Protection Modes | Line to Line, Line to Ground |
| Type | Data Line Surge Protector |
Lists supported applications like Ethernet, PoE, and ISDN.
Catalog numbers for different surge protector models.
Specifies operating conditions: altitude, temperature, and IP rating.
Illustrates surge protector integration in a typical network setup.
Physical dimensions and mounting details for MJ8-CAT5E.
Physical dimensions and mounting details for MJ8-CAT6S.
Step-by-step guide for mounting the surge protector on a DIN rail.
Instructions for attaching the surge protector using a mounting bracket.
Procedure for connecting wires to the surge protection device.
Detailed steps for connecting an RJ45 cable to the surge protector.
Guidance on when and how to replace the surge protection unit.
