Using the R-1 Timer
Timer Standby mode: BLUE
x Elapsed time display changes as watch switches from timer to
stopwatch.
Stopwatch minutes - read off the circular graphic display
minute scale
Stopwatch seconds – read off the second hand
*In timer standby mode, the current time is displayed
x When the timer is running, the hour/minute hands display the
current time; the second hand displays the timer countdown
seconds.
x Once the timer is started, it will compensate for time lost
while the graphic display panel moves into the correct
position. Elapsed time data is accurately displayed on the
graphic display panel.
Press and hold down for more
than 1 second
Return to Table of Contents
Return to Table of Contents
To Next Page
Loading...
