Citizen 6840 - Using Race Mode 3

5D. USING RACE MODE 3
Race mode 3
R-3 Timer (1)
Second hand reset function (2)
Fly-back feature (3)
Time-Up confirmation beep (4)
Race Mode 3 Features
(1) R-3 timer
x
R-3timer settings for 3,5,10,15 minutes are possible by pulling out the (M)
button to the 1st stop position. (See following section)
x Time remaining during timer countdown is displayed on the graphic display
panel.
x
The timer countdown hand (second hand) moves counterclockwise subtracting
time from the timer setting.
(2) Second hand reset
(3) Fly-back - timer restart feature
(4) Time-Up confirmation beep
*(2), (3) are the same as in Race mode 1. (4) is the same as in Race mode 1,
2, with an additional warning beep 10-minutes before time up. See sections
Setting the time and Using Race Mode 1.
Setting the R-3 Timer
Setting Procedures
To “R-3” mode
Circular graphic display minute scale Graphic display panel
3 min. 3 red, 2 white
5 min. 5 red
10 min. 5 blue
15 min. 5 white
Return to Table of Contents
Return to Table of Contents
• Timer settings for 3, 5, 1 0, I 5
minutes are possible on the circular
graphic display minute scale.
• After selecting the timer setting push
the (M) button in to the normal
position. The timer setting will now
be displayed on the graphic display
panel as in the R-1 andR-2 timer
modes.
• Time conversion from the circular
graphic display minute scale to the
graphic display panel.