Need help?Do you have a question about the Citizen AT2141-52L and is the answer not in the manual?
Second hand moves in 2-second intervals when charge is low, indicating a need for charging.
Watch begins operation with 2-second interval movement approximately 10 seconds after light exposure.
The watch stops functioning after about 5 days if the second hand is in 2-second interval movement without charging.
This feature prevents the rechargeable cell from being charged further once it is fully charged.
Ensure the watch is exposed to light, especially when wearing long sleeves, to prevent insufficient charging.
Avoid high temperatures during recharging to prevent potential damage to the watch.
Do not remove the cell. Store safely if removed. Use only specified cells to prevent damage.
Pull crown to correction position, set time, return crown. Pay attention to AM/PM.
Pull crown to date correction position, turn right to set date. Avoid setting between 9 PM and 1 AM.
Start/stop timing with button B. Reset with button A. Measures elapsed time up to 60 minutes.
Procedure to reset the chronograph second hand to the 0 position if it becomes misaligned.
Details water resistance levels (3, 5, 10/20 atmospheres) and their corresponding usage limits.
Use within specified temperatures; avoid high heat, magnets, and static electricity for accuracy.
Keep watch clean using soft cloths, avoid solvents. Periodic inspections are recommended for longevity.
To Next Page
General