4. Setting the Time and Calendar
If your watch has a screw-type crown, unscrew the crown from the case loosen it before
operation. Be sure to press the crown down and screw in after setting the time and/or
date.
<Setting the time>
1. Stop the second hand by pulling the crown out to the 2nd click (time setting
position).
2. Turn the crown to set the time.
3. The watch will start after the crown is firmly pushed back into its normal position.
<Setting the calendar>
1. Pull the crown out to the first click (calendar setting position).
2. Set the desired date by turning the crown counterclockwise.
3. Set the desired day of the week by turning the crown clockwise.
4. After you have set the calendar, be sure to press the crown back to its normal
position.
Do not adjust the calendar when the watch is reading between 9:00 pm and 4:00 am.
Otherwise the movement may become damaged and the calendar may not change correctly.
Return to Table of Contents
Return to Table of Contents
To Next Page
Loading...
Need help?
General
