Citizen CA0820-50X - Page 19

13
English
The chronograph minute/second hands may be come misaligned if the
watch is subjected to a strong knock.
If the position cannot be corrected by using the reset procedures outlined
on pages 12-13, please contact your nearest Authorized Service Center.
e chronograph does not function if the crown is pulled out to position 2.
e chronograph resets if the crown is pulled out to position 2 during measurement.
To start the chronograph, press and release the upper right button (B) to
commence time measurement.
To stop the chronograph, press and release the upper right button (B) again.
To recommence timing from the stopped position, press and release the
upper right button (B) again.
Time measurement start/stop
To reset the chronograph aer stopping time measurement, press and
release the lower right button (A).
Reset
1
2
3
Pressing and releasing the lower right button (A) during chronograph operation will
cause timing to stop and the chronograph to reset.
Caution
24
618
12
2040
60
20
10
30
40
50
60