- Eng 25 -
English
DISPLAY MARK CONDITION/CASE CORRECTIVE ACTION
Pressure was insufficient.
Appears when the blood
pressure could not be
measured accurately.
Re-wrap the arm cuff snugly.
Take another reading, making
sure you remain still.
(
See
page 15 "HOW TO WRAP THE
ARM CUFF".
)
Appears when the pulse
could not be measured
accurately.
* When the pulse reading
i s l o w e r t h a n 4 0 o r
181 and more, "Er" will
appear.
Re-wrap the arm cuff snugly.
Take another reading, making
sure you remain still. ( See
page 15 "HOW TO WRAP THE
ARM CUFF".)
Appears when batteries
become weak.
R e p l a c e a l l f o u r a l k a l i n e
batteries with new ones.
(
See page 11 "HOW TO
UNLOAD BATTERIES".
)
The unit does not
function properly.
Contact the store where it was
purchased or your local service
center.
( See page 28 "BEFORE
A S K I N G F O R R E P A I R /
INSPECTION".)
Pressure was insufficient.
Wrap the cuff around your arm
again and measure your blood
pressure using the Manual
Pressurizing mode.
( See page 22 "Manual
Pressurizing mode".)
ERROR INDICATIONS
To Next Page
Loading...
Need help?
General
