- Eng 15 -
English
MEASURING YOUR BLOOD PRESSURE
4 is displayed soon after
pressurization is complete, and
measurement begins automatically.
* If the unit judges that pressurization
is insufficient, it automatically
repressurizes.
5
blinks each time a pulse is
detected, and the pressure value
is displayed on the diastolic blood
pressure display.
6 Once measurement is complete, the
cuff deflates and the measurement
results (systolic/diastolic blood
pressure values, pulse) are displayed.
* Provided there is no error in the
measurement results, they are
stored automatically.
The Body Movement Indicator is displayed on the measurement results
display if you move your hand or wrist during measurement, causing a
substantial pressure change to be detected.
• If the Body Movement Indicator is displayed, measure your blood pressure
again.
If an irregular heartbeat is detected during measurement, the Irregular
Heartbeat (IHB) Indicator is displayed after measurement is completed.
An irregular heartbeat is defined as a heartbeat that varies by ±25% from the
middle of 5 heartbeat intervals during the blood pressure measurement.
• Measurement may not be correct if your heartbeat fluctuates greatly
during measurement. If the Irregular Heartbeat (IHB) Indicator is displayed,
measure your blood pressure again.
Caution
If the Irregular Heartbeat (IHB) Indicator appears
frequently, you are advised to consult a doctor about your
health condition.
To Next Page
