- Eng 19 -
English
CALLING UP THE DATA STORED IN MEMORY
• Press the “MEMORY” switch again. The
memory number “2” and the second last
set of data stored appear on the display.
Each time you press this switch, the unit
displays the data prior to the last set of data
displayed.
Data number: 1, 2, 3, … …89, 90
The earliest
data
The latest
data
s s
• The value stored in memory is numbered in
the order of measurements. For example,
when 90 sets of data are stored in memory,
the data number 1 represents the latest
data.
* You can fast-forward the data numbers
in display by pressing and holding the
“MEMORY” switch.
• Press the “MEMORY” switch again. The
memory number “1” and the last set of data
stored appear on the display. (The memory
number and pulse are alternately displayed.)
To Next Page
Loading...
