Place your elbow on a table so that the palm is turned upwards
and the cuff center is as high as your heart. Relax your entire
body.
PO
W
ER
START
S
Y
S
T
O
L
IC
D
IA
S
T
O
L
IC
P
U
L
S
/m
in
mmHg
mmHg
Press the “START” switch.
The unit is inflated when the “START” switch is pressed.
When inflation is completed, the automatically exhaust mecha-
nism will gradually deflate the pressure in the “wrist cuff”, and
the mark “Q” will appear indicating that measurement is in
progress.
3. To Start the Measurement
When a pulse is detected, the pressure value moves to the lower
side of the display. At this time the mark “Q” flashes and buzzer
beeps.
If the inflation is insufficient at a pressure of 180mmHg, the
reinflation is automatically made to a pressure of 210, 240, and
280mmHg until inflation is suitable for measurement. This unit
cannot be inflated over a pressure of 280mmHg.
- Eng 8 -
To Next Page
Loading...
