- Eng 12 -
DISPLAY MARK CONDITION / CAUSE CORRECTIVE ACTION
The cuff was inflated to more than 280
mmHg.
Pressurization is not possible
Cuff winding has not been performed
correctly.
The pulse could not be measured ac-
curately.
The arm moved during measurement.
Device has a trouble.
Appears when the pulse could not be
measured.
Appears when the batteries become
weak.
Device has a trouble.
DESCRIPTION OF DISPLAY MARKS
Exhaust the air with in the cuff.
After winding the cuff over again, re-
peat measurement.
After again winding the cuff, conduct
the measurement without moving.
Repeat the measurement without mov-
ing the arm.
Ask purchased shop.
Repeat the measurement without mov-
ing the arm.
Replace the batteries.
Ask purchased shop.
To Next Page
Loading...
Need help?
General
