- Eng 8 -
The heart symbol flashes, and the buzzer sounds
for 1 second. Once the measurement prepara-
tions are completed, the buzzer sounds three
more times.
If batteries become weak, “ ” mark is dis-
played and measurement is discontinued.
Pressurization and measuring start.
When a pulse is detected, the pressure value
moves to the lower side of the display. At this
time the mark “Q” flashes and buzzer beeps.
Once the blood-pressure measurement has sta-
bilized, pressurization is discontinued, the air in
the cuff is automatically let out, the buzzer
sounds for about 2 seconds, and the high and
low blood pressure are respectively displayed
one above the other.
Unless an error is generated, the measurement
results are automatically stored in memory. Up
to 7 sets of results can be stored in memory.
To Next Page
Loading...
Need help?
General
