- Eng 21 -
English
HOW TO CALL UP DATA STORED IN MEMORY
1
Press .
The most recent memory number will appear on
the display.
The data in memory (systolic/diastolic pressure
and pulse rate readings, and the date/time of
measurement) will appear on the display.
• The time and date appear alternately every 2
seconds.
• When is pressed during display of data
in memory, its monthly average data will be
called up.
1
Press during display of data in memory.
Each press will move ONE memory number backward.
• To decrease memory numbers rapidly, keep pressing .
HOW TO CALL UP PREVIOUS MEASUREMENT RESULTS
• To end the display of data in memory, press .
To Next Page
Loading...
