- Eng 20 -
HOW TO CALL UP DATA STORED IN MEMORY
The automatically stored data (measurement results) can be called
up for reference.
* The data stored in memory cannot be called up during
measurement.
* If the measurement results are not stored, the data in memory
cannot be recalled.
Measurements stored in memory are assigned “a memory
number” in the order of measurement. This means when 90
measurements are stored in memory, the measurement having a
memory number of 90 is the most recent.
The device can store up to 90 measurements in its memory.
When more than 90 measurements have been taken, the oldest
measurement will be erased to make room for the most recent
measurement.
To Next Page
Loading...
