CITIZEN WATCH CO., LTD.
• This watch is light-powered. Be sure your watch is fully charged before use.
• For complete instructions for setting, use, charging time and specifications, refer to the full instruction manual: 8723/8725/8729 Click Here
• Illustrations for reference only. Actual appearance of your watch
may differ from the illustrations above.
Model with date/24-hour indicator
Equipped with a date hand at the 12 o’clock position, and a 24-hour
hand at the 6 o’clock position.
Model with date/day indicator
Equipped with a date hand at the 3 o’clock position, and a day hand
at the 9 o’clock position.
Model with date/day/24-hour indicator
Equipped with a date hand at the 3 o’clock position, a 24-hour hand
at the 6 o’clock position, and a day hand at the 9 o’clock position.
Movement number:
8725
1
5
3
2
4
6
Movement number:
8723
1
3
6
2
4
7
SUN
MON
TUE
THU
FRI
SAT
WED
24
9
2
1
3
4
5
6
7
8
10
11
13
15
1
7
19
21
25
2
3
27
29
3
1
12
9
18
60
30
5
35
10
40
55
25
50
20
15
45
1
5
3
2
4
6
7
Movement number:
8729
8723/8725/8729 Abbreviated instruction
ENGLISH
1 Hour hand
2 Minute hand
3 Second hand
4 Crown
5 Day hand
6 Date hand
7 24-hour hand
Component identification
0 1 2
Crown’s positions
Adjusting the date
Adjust the date indication on the first days of March, May, July,
October and December.
• When the time on the watch is between 21:00 and 0:00, do not
execute the adjustment. Otherwise the date indication may change
improperly.
1
Pull the crown out to position
.
2
Rotate the crown counterclockwise to adjust the date.
3
Push the crown in to position
to finish the procedure.
Adjusting the time
1
Pull the crown out to position
when the second hand
points to 12:00 (0 second).
All the hands stop.
2
Rotate the crown to adjust the day. (only for models
with a day indicator)
• As the day hand moves in conjunction with the hour/minute
hand, adjust the day first and then adjust the time.
• The day hand can only be moved by rotating the crown
clockwise. You cannot adjust the day hand independently.
3
Rotate the crown to adjust the time.
• Pay attention the date hand to ensure AM or PM time is set
properly.
• For models with a 24-hour indicator, check the 24-hour hand to
ensure AM or PM time is set properly.
4
Push the crown in to position
in accordance with a
reliable time source to finish the procedure.
• The date indicator begins to change at about 22:30 and has
finished changing by about 0:00.
• The day indicator begins to change at about from 0:00 and has
finished changing by about 5:00 (only for models with a day
indicator).
• Both hands can only be moved by rotating the crown clockwise.
Need help?
General
