Why is the time and/or date not correct on my Citizen Radio Controlled BY0120-54E?
If the time and/or date displayed on your Citizen watch is incorrect, there are several things you can check: * Verify the city setting. * Adjust the daylight saving time setting. * Check and correct the reference position. * Receive the time signal to adjust the time and date. * Set the time and date manually.
How to fix unsuccessful reception on Citizen Radio Controlled BY0120-54E Watch?
If your Citizen watch is not receiving the time signal, even in an area where it should, try the following: * Ensure the crown is pushed in to position 0. * Avoid potential interference and position the watch with the 9:00 position facing the station. * Keep the watch still during reception. * If the second hand moves once every two seconds, the watch needs charging.
What to do if my Citizen Radio Controlled BY0120-54E doesn't move even after charging?
If your Citizen watch is not moving even after charging, try the following: * Charge the watch by exposing it to direct sunlight for five or six hours. * Ensure the crown is pushed in to position 0. * Verify the city setting.
What to do if the second hand on my Citizen Watch moves once every two seconds?
If the second hand on your Citizen watch is moving once every two seconds, it indicates that the watch needs to be charged. Also, ensure the crown is pushed in to position 0.
Why does the date on my Citizen Radio Controlled BY0120-54E change at around 12:00 p.m.?
If the date on your Citizen watch is changing around 12:00 p.m. instead of 12:00 a.m., check and correct the reference position. You can also receive the time signal to adjust the time and date, or adjust the time by 12 hours manually.
Why have all the hands on my Citizen Watch stopped moving?
If all the hands on your Citizen watch have stopped moving, it likely needs to be charged. Expose it to direct sunlight for five or six hours to resolve this.
Why are the time and calendar still incorrect on my Citizen Watch after successful reception?
If the time and calendar are not correct on your Citizen watch even after successful reception, check the city setting and verify and correct the reference position.
What to do if my Citizen Watch is affected by static electricity or shock?
If your Citizen watch is affected by static electricity or shock, reset the watch. If the power reserve is low, charge the watch before resetting.
Why are some hands on my Citizen Radio Controlled BY0120-54E Watch moving unintentionally?
If some of the hands on your Citizen watch are moving unintentionally, stop the chronograph.
Confirm the signal reception result and charge level at first before use.
Instructions for safely handling the rechargeable cell to prevent ingestion.
To Next Page
General