30
Adjusting the reference position
• Before the operation below, be sure to reset the chronograph.
• See the next page to check the correct position for each item.
1.
Ensure that the crown is in position
0
.
2.
Press and hold the upper right button (
B
)
for ten seconds.
The chronograph second hand starts moving.
Then, all hands moves quickly to show the
current reference position.
3.
Pull the crown out to position
2
.
The reference position can now be adjusted.
4.
Press the upper right button (
B
) repeatedly
to select the item for adjustment.
B
B
Crown position
Crown position
To Next Page
Loading...
