To Next PageTo Next PageHow to fix the wrong time and date on my Citizen E650?
If the time and/or date is incorrect on your Citizen watch, try the following: First, verify the city setting is correct. If it is, check and correct the current reference (0) position. You can also attempt a manual radio signal update or set the time and date manually.
How do I correct Daylight Saving Time on my Citizen Watch?
To correct Daylight Saving Time on your Citizen watch, manually select ON or receive the radio signal.
What to do if my Citizen Watch is not receiving signal in a receivable area?
If your Citizen watch isn't receiving a signal, ensure the crown is pushed to position 0 (closed position next to the case) and that the watch is set to the correct city. Avoid potential interference by positioning the watch with the 6:00 position facing the station. Also, keep the watch stationary until reception is complete. If the second hand moves once every 2 seconds, fully charge the watch.
Why is the time and date still wrong on my Citizen E650 Watch after successful reception?
If your Citizen watch displays the incorrect time and date even after a successful signal reception, check the city setting and the current reference (0) position.
What to do if the time is wrong on my Citizen Watch after setting the city and receiving the signal?
If the time on your Citizen watch is incorrect despite setting the city and successfully receiving a signal, verify whether Daylight Saving Time is correctly set. Also, check and correct the current reference (0) position.
Why is the second hand on my Citizen E650 moving once every 2 seconds?
If the second hand on your Citizen watch is moving once every 2 seconds, it indicates that the watch needs to be fully charged.
Why have all the hands stopped moving on my Citizen E650?
If all hands on your Citizen watch have stopped moving, set the crown to position 0 in each time display mode and charge the watch under direct sunlight until the second hand starts moving in 1-second steps.
Why do the hands on my Citizen E650 start turning rapidly when I take it out of the case?
When the hands on your Citizen watch start turning rapidly as you take it out of the case, it means the watch is canceling the power save feature. Wait until the rapid movement stops.
General| Movement | Eco-Drive |
|---|---|
| Case Material | Stainless Steel |
| Water Resistance | 100 meters |
| Glass | Mineral Crystal |
| Band Material | Stainless Steel |
| Case Thickness | 12 mm |
| Dial Color | Black |
| Functions | Alarm, Perpetual Calendar, Chronograph, Dual Time |
| Calendar | Perpetual |
Explains the categorization and meaning of safety advisories like DANGER, WARNING, CAUTION.
Explains how to lock and unlock the screw down crown and push button for security.
Explains the meaning of second hand positions (NO, H, M, L) indicating radio reception results.
Lists cities for radio signal reception and their UTC time differences.
Describes automatic, on-demand, and recovery automatic reception methods.
Provides advice on improving radio signal reception and identifies poor reception areas.
Identifies environmental factors like high-tension wires and windows affecting reception.
Lists examples of areas where radio signal reception may be difficult.
Explains how to set the time for different time zones using 15-minute increments.
Describes how to check if the daylight saving time is set to ON or OFF.
Step-by-step guide to manually set the watch's time, date, and day of the week.
Provides solutions for problems related to radio signal reception.
Addresses issues where watch hands do not move correctly or stop working.
Offers remedies for incorrect time, date, and daylight saving time settings.
