Some areas observe Daylight Saving Time.
• Daylight Saving Time rules will vary depending on the country or region
within a country.
When the watch receives a successful radio signal update for the 5 cities, the
Daylight Saving Time setting is automatically updated, provided the user
has not manually turned OFF overridden the Daylight Saving Time setting.
If you live in an area that does not receive a radio signal, you will need to
update the Daylight Saving Time setting manually.
→
Page 30
■
Checking the daylight savings time setting
While the watch is in the time display mode or A-TM
mode and the crown is set at position
0
, perform
the following steps.
1.
Press and release the upper right button (B).
The second hand moves and points to the current
setting for daylight savings time (ON or OFF).
2.
Press and release the upper right button (B).
The current time display mode is resumed.
• Even if the button is not pressed, the current time display mode is
resumed automatically after about 10 seconds.
Button (B)
ON: Daylight savings
time is set.
OFF: Daylight savings
time is not set.
During the Daylight Saving Time season
During the Daylight Saving Time season
To Next Page
Loading...
