■
Setting the alarm to ON or OFF
1. Pull the crown out to position
1
.
2. Rotate the crown to align the mode
hand to ALM (alarm).
3. Press and release the upper right
button (B).
• Pressing and releasing the upper right
button (B) changes the alarm settings
between ON and OFF.
0 1 2
Button (B)
Button (A)
Second hand
position when
alarm is ON
Second hand position
when alarm is OFF
Using the alarm
4. Rotate the crown to select a city or [A-TM].
• While the watch is in the alarm mode, the alarm will not sound.
5. Return the crown to position
0
to finish the setting.
■
Stopping the alarm
While the alarm is sounding, press and release either the upper right button
(B) or lower right button (A), or pull out the crown.
■
Alarm sound monitor
While the watch is in the [ALM] mode and the crown is set at position
0
,
press the button (A). The alarm sound is played back. The alarm sounds for 5
seconds. To stop the alarm in the interim, press the button (A) or (B).
• While the hands are moving from another mode to the ALM mode, you
cannot play back the alarm sound.
Using the alarm
Mode
hand
To Next Page
Loading...
