8
SettingtheTimeandCalendar
1)Settingthetimeandday
Pull out the crown Set the day Set the time Return the crown
With the second hand in
the 0-second position, pull
the crown out two ‘steps’ to
position 2.
Rotate the crown to the right (clockwise)
to set the day.
(The day hand moves when
the hour hand is indicating between 0 a.m. and
5 a.m.)
Rotate the crown to set the time,
paying attention to a.m. and p.m.
Return the crown to the normal
position (
) in sync with a
reliable time source.
•The24hourhandmovestogetherwiththehour
hand and minute hand