Need help?Do you have a question about the Citizen JCTV3242 and is the answer not in the manual?
Warning about high voltage parts and the danger of electric shock when current is flowing.
Procedure to confirm all parts and wiring are in place and to perform insulation checks after repair.
Details specifications for the TV system, including CRT size, type, deflection, color system, and speaker.
Covers specifications related to the tuning system, broadcasting system, tuner, and intermediate frequency.
Outlines power source, consumption, and protector specifications for the unit.
Details the available settings and features within the On-Screen Display menu for picture and audio.
Lists all functions and keys available on the remote control unit for operating the TV.
Enumerates various features of the TV, including Auto Degauss, Auto Shut Off, CATV, and V-Chip.
Lists the included accessories such as owner's manual, remote control, rod antenna, and various cords.
Describes the input/output interfaces and terminals, including front and rear connections like Video, Audio, and Antenna input.
Identifies the material used for the cabinet front and rear, specifying PS 94V0 DECABROM.
Step-by-step guide on safely removing the anode cap, including discharging high voltage and proper handling.
Detailed procedure for removing and installing flat package ICs using a desoldering machine and tweezers.
Steps for installing a new IC, including polarity, soldering techniques, and final inspection.
Precautions and required tools before performing any electrical adjustments or repairs.
Procedure to adjust RF AGC to a specific voltage level using a monoscope pattern.
Method for adjusting the CUT OFF level by setting the screen volume to achieve a dim raster.
Procedure to adjust white balance (R.BIAS, R.DRIVE, etc.) after CUT OFF adjustment.
Procedure to adjust tint and color centering using color bar patterns and oscilloscope.
Method to adjust horizontal phase by minimizing over scan on the right and left sides.
How to adjust vertical size to achieve a specific over scan percentage on the picture.
Adjusts the horizontal position of the On-Screen Display elements.
Adjusts audio separation for stereo signals using an oscilloscope and signal generator.
Procedure to adjust FM level to a specific AC voltage using a monoscope pattern.
Initial static convergence adjustments using magnets and purity rings to align colors.
Adjusts purity magnets and deflection yoke to ensure uniform color across the screen.
Fine-tuning static convergence by adjusting 4 and 6 pole magnets to align color patterns.
Adjusts dynamic convergence by moving the deflection yoke and inserting wedges to fix alignment.
Diagram showing the location of key components and wiring connections for electrical adjustments.
Shows the component layout on the solder side of the main, CRT, and audio printed circuit boards.
Illustrates the placement of chip-mounted components on the solder side of the main and CRT printed circuit boards.
To Next Page
General