-5-
2 Main specications of peeler
Width of liner (a) : 1.97 – 7 in (50 – 177.8 mm)
Minimum length of label (b) : 1 in (25.4 mm)
Label: ne media/Thickness: 0.09 mm
(including glue layer)/Rolled inwards
Minimum width of label (c) : Label must be positioned at 1.4 in
(10.16 mm) from left edge of liner, which is
viewed from front of media exit
Maximum width of label : To be narrower than liner
Thickness of label : 0.0067 in (0.17 mm) or less
Thickness of liner : 0.0027 in (0.07 mm) or less
Inner diameter of roll media : 3 in (76 mm) or more
Durability : 20 km or 200,000 peeled labels (when using the
label above)
Peeling position accuracy : ±1.5 mm
Peeling position varies depending on the type of
media, the size of roll media and the size of ink
ribbon, so adjust it to the optimum condition as
needed
c
a
b
To Next Page
Loading...
