NAMES OF PARTS
Please see the watch illustration at the beginning.
➇: If the second hand moves to CHARGE
position, this shows that the Insufficient Charge
Warning function is operating.
➈: If the second hand moves to STOP position,
this shows that the Stop Warning Function is
operating.
➉: If the second hand moves to SET position,
this shows that the Time Setting Warning function
is operating.
TIME REQUIRED FOR CHARGING
Time required for recharge may vary according to
the design (colour of the dial, etc.) and operating
environment. The following table will serve you as a
rough reference. *The recharging time is the time
when the watch is continuously exposed to
radiation.
Full recharging time... The time from when watch
(Empty to full) stopped to when it is fully
recharged stopped.
One day usage.......... The recharging time required
for the watch to run for one
day.
To Next Page
Loading...
