Citizen YF30 - Execute Pairing With the Smartphone

When pairing finished successfully
The screen of finish is displayed.
Guides such as ways of use
of the watch are shown.
Swipe left to go to the last
page.
To start pairing on the screen of the app
Tap the watch icon ( ) on the upper right of the home screen, swipe left on
the [CHOOSE DEVICE] screen and tap [ADD NEW WATCH].
When pairing fails
When pairing fails and the target watch does not appear on the dedicated app, try
pairing again following the steps below.
1. Remove “Citizen Connected HR 2.1” on Bluetooth® setting of
your smartphone.
2. Turn off the Bluetooth function on your smartphone and turn
it on again.
3. Execute pairing between the watch and the smartphone
again.
YF30 Abbreviated instruction
When connection fails after pairing (canceling pairing)
Try pairing again following the steps below.
1. Tap the watch icon ( ) on the upper right of the home screen.
2. Swipe left or right on the [CHOOSE DEVICE] screen to display
the watch with which you want to connect your smartphone.
3. Swipe up the bottom tab on the [CHOOSE DEVICE] screen to
display the menu.
4. Tap [REMOVE WATCH].
5. Remove “Citizen Connected HR 2.1” on Bluetooth® setting of
your smartphone.
6. Turn off the Bluetooth function on your smartphone and turn
it on again.
7. Execute pairing between the watch and the smartphone
again.
Synchronizing your watch and smartphone
Once paired, the watch and the smartphone are connected and start to
synchronize their data automatically as the dedicated app is started or displayed.
• All the hands of the watch turn fully around when synchronization starts.
• The time and calendar on the watch are also synchronized with those on the
smartphone.
• It may take a certain period of time for data synchronization.
• Some operations of the app such as change of settings are accompanied with
data synchronization.
• Synchronization does not start when the watch is not charged enough.
• Synchronization does not start when distance between the smartphone and the
watch is 10 m (33 feet) or more or there is any obstacle between them.
Swiping down the [Home] screen also starts data synchronization.