To Next PageTo Next Page
Need help?Do you have a question about the CiTO Power CPO-S1000 and is the answer not in the manual?
General| Capacity | 1000VA / 600W |
|---|---|
| Output Power | 600W |
| Output Frequency | 50/60 Hz ±1 Hz |
| Output Waveform | Simulated Sine Wave |
| Outlets | 4 x IEC C13 |
| Form Factor | Tower |
| Weight | 10.5 kg |
| Input Voltage | 220-240VAC |
| Input Frequency | 50/60Hz (Auto-sensing) |
| Output Voltage | 220-240VAC |
| Battery Type | Sealed Lead-Acid (SLA) |
| Typical Recharge Time | 4-6 hours to 90% |
| Protection | Overload, Overcharge, Short Circuit |
| Communication | USB |
Overview of the Uninterruptible Power System's purpose and benefits.
Highlights the main functionalities and design aspects of the UPS.
Crucial instructions for safe and correct UPS operation.
Guidelines for safely moving and handling the UPS unit.
Recommendations for optimal placement to ensure proper ventilation and safety.
Steps and precautions for correctly connecting the UPS to power.
Procedures and warnings for operating the UPS safely.
Safety measures for servicing and maintaining the UPS, especially battery handling.
Details the components and functions of the UPS front panel.
Illustrates the physical dimensions and layout of the UPS units.
Identifies ports and connectors on the rear panel of the UPS.
Procedures for inspecting the UPS and its packaging before connection.
Steps for connecting the UPS input and output power cables.
Pre-operation checks to ensure the UPS is ready for use.
Step-by-step guide for starting and stopping the UPS.
Guidelines for storing the UPS when not in use for extended periods.
Explanation of the UPS LCD display menus and status indicators.
Displays battery voltage and capacity status.
Shows the current output power load percentage.
Displays the internal temperature of the UPS.
Logs past events and fault records.
Allows configuration of voltage ranges for auto-transfer to bypass.
Enables adjustment of the UPS output voltage.
Diagnoses UPS issues based on LED and LCD status indicators.
Addresses UPS overload conditions and recommended actions.
Diagnoses issues when the UPS operates via bypass mode.
Handles scenarios during battery power operation and failure.
Addresses UPS shutdown due to low battery power.
Handles UPS shutdown after battery exhaustion.
Visual representation of the UPS internal system components and flow.
Describes the UPS operation when AC utility power is available.
Explains UPS operation during AC utility power loss.
Lists conditions under which the UPS will enable bypass mode.
Details the DB9 port for connecting to a computer for monitoring.
Defines the function of each pin on the DB9 connector for the 1K model.
Defines the function of each pin on the DB9 connector for 2K/3K models.
