control stalk is in the
"AUT
" position, pulled towards
ou, and the function is activated
stem is in dipped beam mode
s there is sufficient ambient li
nd/or the traffic conditions do not
m.
The camera, located in the door mirror, mana
es the
operation of main beam, dependin
ain to deactivate.
For more in
control stalk is in the
"AUT
ou, and the function is activated
stem is in main beam mode
lamps are switched on. Turn the rin
on the stalk rearwards to switch off the
rear fo
lamps are switched on. Turn the rin
on the stalk rearwards twice to switch o
lamps.
For more information on the li
controls, refer to the correspondin