CITROEN C4X - Page 223

221
MyCitroën Play
11
The regulations of the 5 GHz frequency
are specic to each country. Refer to the
regulation in force in your country.
When using CarPlay
®
with 5 GHz
frequency activated, there may be
interference with certain devices (tolls,
parking...) resulting in a disconnection. To
prevent this from happening, it is
recommended to disable the 5 GHz function.
Di󰀩culties in connecting wirelessly your
smartphone may happen, due to:
– Interference with other Wi-Fi networks.
– Interference with certain devices (tolls,
parking) when using Android Auto.
– An unsuitable conguration of the
smartphone.
In these cases, it is recommended to connect
the smartphone with its original cable.
CarPlay
®
smartphone connection
The availability of the application depends on the
country.
USB connection
On connecting the USB cable, the
CarPlay
®
function deactivates the
system's Bluetooth
®
mode.
The "CarPlay" function requires the use of
a compatible smartphone and compatible
applications.
Connect the USB cable.
The smartphone charges when connected by the
USB cable.
From the system, press "Telephone" to
display the main page.
Press "CarPlay" to display the CarPlay
®
interface.
CarPlay
®
interface may appear
automatically.
When the USB cable is disconnected
and the ignition is switched o󰀨 then back
on, the system will not automatically switch to
Radio Media mode; the source must be
changed manually.
The CarPlay
®
navigation can be accessed
at any time by pressing the system's
Navigation button.
Wireless connection
First activate the smartphone’s Bluetooth
®
function.
From the system, press "Telephone" to
display the main page.
If the device has already been connected to the
system via Bluetooth
®
, select the device settings
from the list of known devices and choose
CarPlay
®
as the wireless connection mode.
If the device has never been connected to the
system before, it will have to be paired (refer to
the corresponding section).
The system detects if the smartphone is
compatible with CarPlay
®
and o󰀨ers to connect
to it following the pairing process.
Subsequent automatic connection of the
smartphone requires activation of the Bluetooth
®
on your device.
As soon as the connection is established,
press "CarPlay" to display the CarPlay
®
interface.
Press and hold this steering-mounted
control button and say "Siri" to initiate the
smartphone voice commands.
Android Auto smartphone connection
The availability of the application depends on the
country.
On the smartphone, download the
Android Auto application.
The "Android Auto" function requires the
use of a compatible smartphone and
applications.
The rst connection of Android Auto to
the system should be made by USB
cable.
USB connection
Connect a USB cable.
The smartphone charges when connected by a
USB cable.