68
Lighting and visibility
With MyCitroën Drive Plus
You can activate/deactivate this function
and adjust the duration of the guide-me-
home lighting in the Settings > Vehicle touch
screen application.
Manual
► With the ignition o, pull the lighting control
stalk toward you ("headlamp ash") to activate/
deactivate the function.
Manual guide-me-home lighting goes o
automatically after a period of time.
Welcome lighting
When the vehicle is unlocked in low light
conditions and the "Automatic illumination of
headlamps" function is activated, this system
automatically switches on:
– Outside, sidelamps, dipped beam headlamps
and door mirror spotlamps.
– Inside, courtesy lamps and footwell lighting.
With Touch screen BLUETOOTH audio
system or MyCitroën Play
You can activate/deactivate this function
and adjust the welcome lighting duration
in the Driving touch screen menu.
With MyCitroën Drive
You can activate/deactivate this function
and adjust the welcome lighting duration
in the Vehicle touch screen menu.
With MyCitroën Drive Plus
You can activate/deactivate this function
and adjust the duration of the welcome
lighting in the Settings > Vehicle touch screen
application.
Door mirror spotlamps
These spotlamps facilitate access to the vehicle
by lighting the ground near the front doors.
When the front courtesy lamp switch is in
this position, the spotlamps come on
automatically:
– when the vehicle is unlocked.
– when a door is opened.
– when a request to locate the vehicle is
received from the remote control.
Whatever the position of the front courtesy lamp
switch, they also come on with the welcome
lighting and guide-me-home lighting functions.
They go o automatically after 30 seconds.
Automatic lighting
systems - General
recommendations
The automatic lighting systems use a detection
camera, located at the top of the windscreen.
Operating limits
The system may be disrupted or not work
correctly:
– When visibility conditions are poor
(e.g. snowfall, heavy rain).
– If the windscreen is dirty, misted-up or
masked (e.g. sticker) in front of the camera.
– If the vehicle is facing highly reective signs
or safety barrier reectors.
The system is not able to detect:
– Road users that do not have their own
lighting, such as pedestrians.
– Vehicles with hidden lighting (e.g. travelling
behind a safety barrier on the motorway).
– Vehicles at the top or bottom of a steep
slope, on winding roads, on crossroads.
Maintenance
Clean the windscreen regularly,
particularly the area in front of the camera.
The internal surface of the windscreen can
also become misted around the camera.
In humid and cold weather, demist the
windscreen regularly.
To Next Page
Loading...
